Eventing-contrib Resources

Spec is the part where the Channelable fulfills the Subscribable contract.

(Members of SubscribableSpec are embedded into this type.)

DeliverySpec contains options controlling the event delivery

(Members of Status are embedded into this type.)

inherits duck/v1 Status, which currently provides: * ObservedGeneration - the ‘Generation’ of the Service that was last processed by the controller. * Conditions - the latest available observations of a resource’s current state.

(Members of AddressStatus are embedded into this type.)

AddressStatus is the part where the Channelable fulfills the Addressable contract.

(Members of SubscribableStatus are embedded into this type.)

Subscribers is populated with the statuses of each of the Channelable’s subscribers.

DeadLetterChannel is a KReference and is set by the channel when it supports native error handling via a channel Failed messages are delivered here.

Extensions specify what attribute are added or overridden on the outbound event. Each Extensions key-value pair are set on the event as an attribute extension independently.

DeadLetterSink is the sink receiving event that could not be sent to a destination.

Retry is the minimum number of retries the sender should attempt when sending an event before moving it to the dead letter sink.

BackoffPolicy is the retry backoff policy (linear, exponential).

BackoffDelay is the delay before retrying. More information on Duration format: https://www.ietf.org/rfc/rfc3339.txt

For linear policy, backoff delay is the time interval between retries. For exponential policy , backoff delay is backoffDelay*2^.

DeadLetterChannel is a KReference that is the reference to the native, platform specific channel where failed events are sent to.

Ref points to an Addressable.

URI can be an absolute URL(non-empty scheme and non-empty host) pointing to the target or a relative URI. Relative URIs will be resolved using the base URI retrieved from Ref.

Sink is a reference to an object that will resolve to a domain name or a URI directly to use as the sink.

CloudEventOverrides defines overrides to control the output format and modifications of the event sent to the sink.

(Members of Status are embedded into this type.)

inherits duck/v1beta1 Status, which currently provides: * ObservedGeneration - the ‘Generation’ of the Service that was last processed by the controller. * Conditions - the latest available observations of a resource’s current state.

SinkURI is the current active sink URI that has been configured for the Source.

ObservedGeneration is the ‘Generation’ of the Service that was last processed by the controller.

Conditions the latest available observations of a resource’s current state.

SubscribableSpec is the part where Subscribable object is configured as to be compatible with Subscribable contract.

SubscribableStatus is the part where SubscribableStatus object is configured as to be compatible with Subscribable contract.

This is the list of subscriptions for this subscribable.

This is the list of subscription’s statuses for this channel.

UID is used to understand the origin of the subscriber.

Generation of the origin of the subscriber with uid:UID.

SubscriberURI is the endpoint for the subscriber

ReplyURI is the endpoint for the reply

DeliverySpec contains options controlling the event delivery

UID is used to understand the origin of the subscriber.

Generation of the origin of the subscriber with uid:UID.

Status of the subscriber.

A human readable message indicating details of Ready status.

Spec holds the desired state of the PodAutoscaler (from the client).

Status communicates the observed state of the PodAutoscaler (from the controller).

Spec holds the desired state of the Metric (from the client).

Status communicates the observed state of the Metric (from the controller).

StableWindow is the aggregation window for metrics in a stable state.

PanicWindow is the aggregation window for metrics where quick reactions are needed.

ScrapeTarget is the K8s service that publishes the metric endpoint.

(Members of Status are embedded into this type.)

DeprecatedGeneration was used prior in Kubernetes versions <1.11 when metadata.generation was not being incremented by the api server

This property will be dropped in future Knative releases and should not be used - use metadata.generation

Tracking issue: https://github.com/knative/serving/issues/643

ContainerConcurrency specifies the maximum allowed in-flight (concurrent) requests per container of the Revision. Defaults to 0 which means unlimited concurrency.

ScaleTargetRef defines the /scale-able resource that this PodAutoscaler is responsible for quickly right-sizing.

Reachable specifies whether or not the ScaleTargetRef can be reached (ie. has a route). Defaults to ReachabilityUnknown

The application-layer protocol. Matches ProtocolType inferred from the revision spec.

(Members of Status are embedded into this type.)

ServiceName is the K8s Service name that serves the revision, scaled by this PA. The service is created and owned by the ServerlessService object owned by this PA.

MetricsServiceName is the K8s Service name that provides revision metrics. The service is managed by the PA object.

DesiredScale shows the current desired number of replicas for the revision.

ActualScale shows the actual number of replicas for the revision.

Spec holds the desired state of the Route (from the client).

Status communicates the observed state of the Route (from the controller).

Template holds the latest specification for the Revision to be stamped out.

(Members of Status are embedded into this type.)

(Members of ConfigurationStatusFields are embedded into this type.)

LatestReadyRevisionName holds the name of the latest Revision stamped out from this Configuration that has had its “Ready” condition become “True”.

LatestCreatedRevisionName is the last revision that was created from this Configuration. It might not be ready yet, for that use LatestReadyRevisionName.

(Members of PodSpec are embedded into this type.)

ContainerConcurrency specifies the maximum allowed in-flight (concurrent) requests per container of the Revision. Defaults to 0 which means concurrency to the application is not limited, and the system decides the target concurrency for the autoscaler.

TimeoutSeconds holds the max duration the instance is allowed for responding to a request. If unspecified, a system default will be provided.

(Members of Status are embedded into this type.)

ServiceName holds the name of a core Kubernetes Service resource that load balances over the pods backing this Revision.

LogURL specifies the generated logging url for this particular revision based on the revision url template specified in the controller’s config.

DeprecatedImageDigest holds the resolved digest for the image specified within .Spec.Container.Image. The digest is resolved during the creation of Revision. This field holds the digest value regardless of whether a tag or digest was originally specified in the Container object. It may be empty if the image comes from a registry listed to skip resolution. If multiple containers specified then DeprecatedImageDigest holds the digest for serving container. DEPRECATED: Use ContainerStatuses instead. TODO(savitaashture) Remove deprecatedImageDigest. ref https://kubernetes.io/docs/reference/using-api/deprecation-policy for deprecation.

ContainerStatuses is a slice of images present in .Spec.Container[*].Image to their respective digests and their container name. The digests are resolved during the creation of Revision. ContainerStatuses holds the container name and image digests for both serving and non serving containers. ref: http://bit.ly/image-digests

Traffic specifies how to distribute traffic over a collection of revisions and configurations.

(Members of Status are embedded into this type.)

(Members of RouteStatusFields are embedded into this type.)

URL holds the url that will distribute traffic over the provided traffic targets. It generally has the form http[s]://{route-name}.{route-namespace}.{cluster-level-suffix}

Address holds the information needed for a Route to be the target of an event.

Traffic holds the configured traffic distribution. These entries will always contain RevisionName references. When ConfigurationName appears in the spec, this will hold the LatestReadyRevisionName that we last observed.

(Members of ConfigurationSpec are embedded into this type.)

ServiceSpec inlines an unrestricted ConfigurationSpec.

(Members of RouteSpec are embedded into this type.)

ServiceSpec inlines RouteSpec and restricts/defaults its fields via webhook. In particular, this spec can only reference this Service’s configuration and revisions (which also influences defaults).

(Members of Status are embedded into this type.)

(Members of ConfigurationStatusFields are embedded into this type.)

In addition to inlining ConfigurationSpec, we also inline the fields specific to ConfigurationStatus.

(Members of RouteStatusFields are embedded into this type.)

In addition to inlining RouteSpec, we also inline the fields specific to RouteStatus.

Tag is optionally used to expose a dedicated url for referencing this target exclusively.

RevisionName of a specific revision to which to send this portion of traffic. This is mutually exclusive with ConfigurationName.

ConfigurationName of a configuration to whose latest revision we will send this portion of traffic. When the “status.latestReadyRevisionName” of the referenced configuration changes, we will automatically migrate traffic from the prior “latest ready” revision to the new one. This field is never set in Route’s status, only its spec. This is mutually exclusive with RevisionName.

LatestRevision may be optionally provided to indicate that the latest ready Revision of the Configuration should be used for this traffic target. When provided LatestRevision must be true if RevisionName is empty; it must be false when RevisionName is non-empty.

Percent indicates that percentage based routing should be used and the value indicates the percent of traffic that is be routed to this Revision or Configuration. 0 (zero) mean no traffic, 100 means all traffic. When percentage based routing is being used the follow rules apply: - the sum of all percent values must equal 100 - when not specified, the implied value for percent is zero for that particular Revision or Configuration

URL displays the URL for accessing named traffic targets. URL is displayed in status, and is disallowed on spec. URL must contain a scheme (e.g. http://) and a hostname, but may not contain anything else (e.g. basic auth, url path, etc.)

Spec holds the desired state of the Configuration (from the client).

Status communicates the observed state of the Configuration (from the controller).

Spec holds the desired state of the Revision (from the client).

Status communicates the observed state of the Revision (from the controller).

Spec holds the desired state of the Route (from the client).

Status communicates the observed state of the Route (from the controller).

DeprecatedGeneration was used prior in Kubernetes versions <1.11 when metadata.generation was not being incremented by the api server

This property will be dropped in future Knative releases and should not be used - use metadata.generation

Tracking issue: https://github.com/knative/serving/issues/643

Build optionally holds the specification for the build to perform to produce the Revision’s container image.

DeprecatedRevisionTemplate holds the latest specification for the Revision to be stamped out. If a Build specification is provided, then the DeprecatedRevisionTemplate’s BuildName field will be populated with the name of the Build object created to produce the container for the Revision. DEPRECATED Use Template instead.

Template holds the latest specification for the Revision to be stamped out.

(Members of Status are embedded into this type.)

(Members of ConfigurationStatusFields are embedded into this type.)

LatestReadyRevisionName holds the name of the latest Revision stamped out from this Configuration that has had its “Ready” condition become “True”.

LatestCreatedRevisionName is the last revision that was created from this Configuration. It might not be ready yet, for that use LatestReadyRevisionName.

The revision name to pin this service to until changed to a different service type.

The configuration for this service.

Revisions is an ordered list of 1 or 2 revisions. The first will have a TrafficTarget with a name of “current” and the second will have a name of “candidate”.

RolloutPercent is the percent of traffic that should be sent to the “candidate” revision. Valid values are between 0 and 99 inclusive.

The configuration for this service. All revisions from this service must come from a single configuration.

(Members of RevisionSpec are embedded into this type.)

DeprecatedGeneration was used prior in Kubernetes versions <1.11 when metadata.generation was not being incremented by the api server

This property will be dropped in future Knative releases and should not be used - use metadata.generation

Tracking issue: https://github.com/knative/serving/issues/643

DeprecatedServingState holds a value describing the desired state the Kubernetes resources should be in for this Revision. Users must not specify this when creating a revision. These values are no longer updated by the system.

DeprecatedContainer defines the unit of execution for this Revision. In the context of a Revision, we disallow a number of the fields of this Container, including: name and lifecycle. See also the runtime contract for more information about the execution environment: https://github.com/knative/serving/blob/master/docs/runtime-contract.md

(Members of Status are embedded into this type.)

ServiceName holds the name of a core Kubernetes Service resource that load balances over the pods backing this Revision.

LogURL specifies the generated logging url for this particular revision based on the revision url template specified in the controller’s config.

DeprecatedImageDigest holds the resolved digest for the image specified within .Spec.Container.Image. The digest is resolved during the creation of Revision. This field holds the digest value regardless of whether a tag or digest was originally specified in the Container object. It may be empty if the image comes from a registry listed to skip resolution. If multiple containers specified then DeprecatedImageDigest holds the digest for serving container. DEPRECATED: Use ContainerStatuses instead. TODO(savitaashture) Remove deprecatedImageDigest. ref https://kubernetes.io/docs/reference/using-api/deprecation-policy for deprecation.

ContainerStatuses is a slice of images present in .Spec.Container[*].Image to their respective digests and their container name. The digests are resolved during the creation of Revision. ContainerStatuses holds the container name and image digests for both serving and non serving containers. ref: http://bit.ly/image-digests

DeprecatedGeneration was used prior in Kubernetes versions <1.11 when metadata.generation was not being incremented by the api server

This property will be dropped in future Knative releases and should not be used - use metadata.generation

Tracking issue: https://github.com/knative/serving/issues/643

Traffic specifies how to distribute traffic over a collection of Knative Serving Revisions and Configurations.

(Members of Status are embedded into this type.)

(Members of RouteStatusFields are embedded into this type.)

URL holds the url that will distribute traffic over the provided traffic targets. It generally has the form http[s]://{route-name}.{route-namespace}.{cluster-level-suffix}

DeprecatedDomain holds the top-level domain that will distribute traffic over the provided targets. It generally has the form {route-name}.{route-namespace}.{cluster-level-suffix}

DeprecatedDomainInternal holds the top-level domain that will distribute traffic over the provided targets from inside the cluster. It generally has the form {route-name}.{route-namespace}.svc.{cluster-domain-name} DEPRECATED: Use Address instead.

Address holds the information needed for a Route to be the target of an event.

Traffic holds the configured traffic distribution. These entries will always contain RevisionName references. When ConfigurationName appears in the spec, this will hold the LatestReadyRevisionName that we last observed.

The configuration for this service.

DeprecatedGeneration was used prior in Kubernetes versions <1.11 when metadata.generation was not being incremented by the api server

This property will be dropped in future Knative releases and should not be used - use metadata.generation

Tracking issue: https://github.com/knative/serving/issues/643

DeprecatedRunLatest defines a simple Service. It will automatically configure a route that keeps the latest ready revision from the supplied configuration running.

DeprecatedPinned is DEPRECATED in favor of ReleaseType

DeprecatedManual mode enables users to start managing the underlying Route and Configuration resources directly. This advanced usage is intended as a path for users to graduate from the limited capabilities of Service to the full power of Route.

Release enables gradual promotion of new revisions by allowing traffic to be split between two revisions. This type replaces the deprecated Pinned type.

(Members of ConfigurationSpec are embedded into this type.)

We are moving to a shape where the Configuration and Route specifications are inlined into the Service, which gives them compatible shapes. We are staging this change here as a path to this in v1beta1, which drops the “mode” based specifications above. Ultimately all non-v1beta1 fields will be deprecated, and then dropped in v1beta1.

(Members of RouteSpec are embedded into this type.)

(Members of Status are embedded into this type.)

(Members of RouteStatusFields are embedded into this type.)

(Members of ConfigurationStatusFields are embedded into this type.)

Name is optionally used to expose a dedicated hostname for referencing this target exclusively. It has the form: {name}.${route.status.domain}

(Members of TrafficTarget are embedded into this type.)

We inherit most of our fields by inlining the v1 type. Ultimately all non-v1 fields will be deprecated.

Type refers to the CloudEvent type attribute.

Source is the CloudEvents source attribute.

Extensions specify what attribute are added or overridden on the outbound event. Each Extensions key-value pair are set on the event as an attribute extension independently.

Ref points to an Addressable.

URI can be an absolute URL(non-empty scheme and non-empty host) pointing to the target or a relative URI. Relative URIs will be resolved using the base URI retrieved from Ref.

Kind of the referent. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds

Namespace of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/namespaces/ This is optional field, it gets defaulted to the object holding it if left out.

Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names

API version of the referent.

Standard object’s metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata

Specification of the desired behavior of the pod. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status

Sink is a reference to an object that will resolve to a uri to use as the sink.

CloudEventOverrides defines overrides to control the output format and modifications of the event sent to the sink.

(Members of Status are embedded into this type.)

inherits duck/v1beta1 Status, which currently provides: * ObservedGeneration - the ‘Generation’ of the Service that was last processed by the controller. * Conditions - the latest available observations of a resource’s current state.

SinkURI is the current active sink URI that has been configured for the Source.

CloudEventAttributes are the specific attributes that the Source uses as part of its CloudEvents.

ObservedGeneration is the ‘Generation’ of the Service that was last processed by the controller.

Conditions the latest available observations of a resource’s current state.

Standard object’s metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata

Spec is the desired state of the Certificate. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status

Status is the current state of the Certificate. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status

Standard object’s metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata"

Spec is the desired state of the Ingress. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status

Status is the current state of the Ingress. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status

Standard object’s metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata"

Spec is the desired state of the ServerlessService. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status

Status is the current state of the ServerlessService. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-statuss

DNSNames is a list of DNS names the Certificate could support. The wildcard format of DNSNames (e.g. *.default.example.com) is supported.

SecretName is the name of the secret resource to store the SSL certificate in.

(Members of Status are embedded into this type.)

When Certificate status is ready, it means: - The target secret exists - The target secret contains a certificate that has not expired - The target secret contains a private key valid for the certificate

The expiration time of the TLS certificate stored in the secret named by this resource in spec.secretName.

HTTP01Challenges is a list of HTTP01 challenges that need to be fulfilled in order to get the TLS certificate..

URL is the URL that the HTTP01 challenge is expected to serve on.

ServiceName is the name of the service to serve HTTP01 challenge requests.

ServiceNamespace is the namespace of the service to serve HTTP01 challenge requests.

ServicePort is the port of the service to serve HTTP01 challenge requests.

Path is an extended POSIX regex as defined by IEEE Std 1003.1, (i.e this follows the egrep/unix syntax, not the perl syntax) matched against the path of an incoming request. Currently it can contain characters disallowed from the conventional “path” part of a URL as defined by RFC 3986. Paths must begin with a ‘/’. If unspecified, the path defaults to a catch all sending traffic to the backend.

Splits defines the referenced service endpoints to which the traffic will be forwarded to.

AppendHeaders allow specifying additional HTTP headers to add before forwarding a request to the destination service.

NOTE: This differs from K8s Ingress which doesn’t allow header appending.

Timeout for HTTP requests.

NOTE: This differs from K8s Ingress which doesn’t allow setting timeouts.

Retry policy for HTTP requests.

NOTE: This differs from K8s Ingress which doesn’t allow retry settings.

A collection of paths that map requests to backends.

If they are multiple matching paths, the first match takes precendent.

Number of retries for a given request.

Timeout per retry attempt for a given request. format: 1h/1m/1s/1ms. MUST BE >=1ms.

Specifies the namespace of the referenced service.

NOTE: This differs from K8s Ingress to allow routing to different namespaces.

Specifies the name of the referenced service.

Specifies the port of the referenced service.

(Members of IngressBackend are embedded into this type.)

Specifies the backend receiving the traffic split.

Specifies the split percentage, a number between 0 and 100. If only one split is specified, we default to 100.

NOTE: This differs from K8s Ingress to allow percentage split.

AppendHeaders allow specifying additional HTTP headers to add before forwarding a request to the destination service.

NOTE: This differs from K8s Ingress which doesn’t allow header appending.

Host is the fully qualified domain name of a network host, as defined by RFC 3986. Note the following deviations from the “host” part of the URI as defined in the RFC: 1. IPs are not allowed. Currently a rule value can only apply to the IP in the Spec of the parent . 2. The : delimiter is not respected because ports are not allowed. Currently the port of an Ingress is implicitly :80 for http and :443 for https. Both these may change in the future. If the host is unspecified, the Ingress routes all traffic based on the specified IngressRuleValue. If multiple matching Hosts were provided, the first rule will take precedent.

Visibility signifies whether this rule should ClusterLocal. If it’s not specified then it defaults to ExternalIP.

HTTP represents a rule to apply against incoming requests. If the rule is satisfied, the request is routed to the specified backend.

DeprecatedGeneration was used prior in Kubernetes versions <1.11 when metadata.generation was not being incremented by the api server

This property will be dropped in future Knative releases and should not be used - use metadata.generation

Tracking issue: https://github.com/knative/serving/issues/643

TLS configuration. Currently Ingress only supports a single TLS port: 443. If multiple members of this list specify different hosts, they will be multiplexed on the same port according to the hostname specified through the SNI TLS extension, if the ingress controller fulfilling the ingress supports SNI.

A list of host rules used to configure the Ingress.

Visibility setting.

(Members of Status are embedded into this type.)

LoadBalancer contains the current status of the load-balancer. This is to be superseded by the combination of PublicLoadBalancer and PrivateLoadBalancer

PublicLoadBalancer contains the current status of the load-balancer.

PrivateLoadBalancer contains the current status of the load-balancer.

Hosts is a list of hosts included in the TLS certificate. The values in this list must match the name/s used in the tlsSecret. Defaults to the wildcard host setting for the loadbalancer controller fulfilling this Ingress, if left unspecified.

SecretName is the name of the secret used to terminate SSL traffic.

SecretNamespace is the namespace of the secret used to terminate SSL traffic.

ServerCertificate identifies the certificate filename in the secret. Defaults to tls.crt.

PrivateKey identifies the private key filename in the secret. Defaults to tls.key.

IP is set for load-balancer ingress points that are IP based (typically GCE or OpenStack load-balancers)

Domain is set for load-balancer ingress points that are DNS based (typically AWS load-balancers)

DomainInternal is set if there is a cluster-local DNS name to access the Ingress.

NOTE: This differs from K8s Ingress, since we also desire to have a cluster-local DNS name to allow routing in case of not having a mesh.

MeshOnly is set if the Ingress is only load-balanced through a Service mesh.

Ingress is a list containing ingress points for the load-balancer. Traffic intended for the service should be sent to these ingress points.

Mode describes the mode of operation of the ServerlessService.

ObjectRef defines the resource that this ServerlessService is responsible for making “serverless”.

The application-layer protocol. Matches RevisionProtocolType set on the owning pa/revision. serving imports networking, so just use string.

NumActivators contains number of Activators that this revision should be assigned. O means — assign all.

(Members of Status are embedded into this type.)

ServiceName holds the name of a core K8s Service resource that load balances over the pods backing this Revision (activator or revision).

PrivateServiceName holds the name of a core K8s Service resource that load balances over the user service pods backing this Revision.

Spec holds the desired state of the Route (from the client).

Status communicates the observed state of the Route (from the controller).

Spec defines the desired state of the Broker.

Status represents the current state of the Broker. This data may be out of date.

Spec defines the desired state of the EventType.

Status represents the current state of the EventType. This data may be out of date. TODO might be removed https://github.com/knative/eventing/issues/2750

Spec defines the desired state of the Trigger.

Status represents the current state of the Trigger. This data may be out of date.

ChannelTemplate specifies which Channel CRD to use to create all the Channels used internally by the Broker. If left unspecified, it is set to the default Channel CRD for the namespace (or cluster, in case there are no defaults for the namespace). Deprecated: See spec.config to configure aditional broker options. Unless class is for channel based broker implementation.

Config is a KReference to the configuration that specifies configuration options for this Broker. For example, this could be a pointer to a ConfigMap. NOTE: this is for backwards compatibility with v1alpha1 <-> v1beta1 conversions.

Delivery is the delivery specification to be used internally by the broker to create subscriptions.

(Members of Status are embedded into this type.)

inherits duck/v1 Status, which currently provides: * ObservedGeneration - the ‘Generation’ of the Service that was last processed by the controller. * Conditions - the latest available observations of a resource’s current state.

Broker is Addressable. It currently exposes the endpoint as a fully-qualified DNS name which will distribute traffic over the provided targets from inside the cluster.

It generally has the form {broker}-router.{namespace}.svc.{cluster domain name}

TriggerChannel is an objectref to the object for the TriggerChannel

Type represents the CloudEvents type. It is authoritative.

Source is a URI, it represents the CloudEvents source.

Schema is a URI, it represents the CloudEvents schemaurl extension attribute. It may be a JSON schema, a protobuf schema, etc. It is optional.

TODO remove https://github.com/knative/eventing/issues/2750 Broker refers to the Broker that can provide the EventType.

Description is an optional field used to describe the EventType, in any meaningful way.

(Members of Status are embedded into this type.)

inherits duck/v1 Status, which currently provides: * ObservedGeneration - the ‘Generation’ of the Service that was last processed by the controller. * Conditions - the latest available observations of a resource’s current state.

DeprecatedSourceAndType filters events based on exact matches on the CloudEvents type and source attributes. This field has been replaced by the Attributes field.

Attributes filters events by exact match on event context attributes. Each key in the map is compared with the equivalent key in the event context. An event passes the filter if all values are equal to the specified values.

Nested context attributes are not supported as keys. Only string values are supported.

Broker is the broker that this trigger receives events from. If not specified, will default to ‘default’.

Filter is the filter to apply against all events from the Broker. Only events that pass this filter will be sent to the Subscriber. If not specified, will default to allowing all events.

Subscriber is the addressable that receives events from the Broker that pass the Filter. It is required.

(Members of Status are embedded into this type.)

inherits duck/v1 Status, which currently provides: * ObservedGeneration - the ‘Generation’ of the Service that was last processed by the controller. * Conditions - the latest available observations of a resource’s current state.

SubscriberURI is the resolved URI of the receiver for this Trigger.

Spec defines the desired state of the Parallel.

Status represents the current state of the Parallel. This data may be out of date.

Filter is the expression guarding the branch

Subscriber receiving the event when the filter passes

Reply is a Reference to where the result of Subscriber of this case gets sent to. If not specified, sent the result to the Parallel Reply

Delivery is the delivery specification for events to the subscriber This includes things like retries, DLQ, etc. Needed for Roundtripping v1alpha1 <-> v1beta1.

FilterSubscriptionStatus corresponds to the filter subscription status.

FilterChannelStatus corresponds to the filter channel status.

SubscriptionStatus corresponds to the subscriber subscription status.

Channel is the reference to the underlying channel.

ReadyCondition indicates whether the Channel is ready or not.

Branches is the list of Filter/Subscribers pairs.

ChannelTemplate specifies which Channel CRD to use. If left unspecified, it is set to the default Channel CRD for the namespace (or cluster, in case there are no defaults for the namespace).

Reply is a Reference to where the result of a case Subscriber gets sent to when the case does not have a Reply

(Members of Status are embedded into this type.)

inherits duck/v1 Status, which currently provides: * ObservedGeneration - the ‘Generation’ of the Service that was last processed by the controller. * Conditions - the latest available observations of a resource’s current state.

IngressChannelStatus corresponds to the ingress channel status.

BranchStatuses is an array of corresponding to branch statuses. Matches the Spec.Branches array in the order.

(Members of AddressStatus are embedded into this type.)

AddressStatus is the starting point to this Parallel. Sending to this will target the first subscriber. It generally has the form {channel}.{namespace}.svc.{cluster domain name}

Subscription is the reference to the underlying Subscription.

ReadyCondition indicates whether the Subscription is ready or not.

Spec defines the desired state of the Sequence.

Status represents the current state of the Sequence. This data may be out of date.

Channel is the reference to the underlying channel.

ReadyCondition indicates whether the Channel is ready or not.

Steps is the list of Destinations (processors / functions) that will be called in the order provided.

ChannelTemplate specifies which Channel CRD to use. If left unspecified, it is set to the default Channel CRD for the namespace (or cluster, in case there are no defaults for the namespace).

Reply is a Reference to where the result of the last Subscriber gets sent to.

(Members of Status are embedded into this type.)

inherits duck/v1 Status, which currently provides: * ObservedGeneration - the ‘Generation’ of the Service that was last processed by the controller. * Conditions - the latest available observations of a resource’s current state.

SubscriptionStatuses is an array of corresponding Subscription statuses. Matches the Spec.Steps array in the order.

ChannelStatuses is an array of corresponding Channel statuses. Matches the Spec.Steps array in the order.

(Members of AddressStatus are embedded into this type.)

AddressStatus is the starting point to this Sequence. Sending to this will target the first subscriber. It generally has the form {channel}.{namespace}.svc.{cluster domain name}

(Members of Destination are embedded into this type.)

Subscriber receiving the step event

Delivery is the delivery specification for events to the subscriber This includes things like retries, DLQ, etc. Needed for Roundtripping v1alpha1 <-> v1beta1.

Subscription is the reference to the underlying Subscription.

ReadyCondition indicates whether the Subscription is ready or not.

Spec defines the desired state of the Channel.

Status represents the current state of the Channel. This data may be out of date.

Spec defines the desired state of the Channel.

Status represents the current state of the Channel. This data may be out of date.

ChannelTemplate specifies which Channel CRD to use to create the CRD Channel backing this Channel. This is immutable after creation. Normally this is set by the Channel defaulter, not directly by the user.

(Members of ChannelableSpec are embedded into this type.)

Channel conforms to ChannelableSpec

(Members of ChannelableStatus are embedded into this type.)

Channel conforms to ChannelableStatus

Channel is an KReference to the Channel CRD backing this Channel.

Spec defines the Spec to use for each channel created. Passed in verbatim to the Channel CRD as Spec section.

Spec defines the Spec to use for each channel created. Passed in verbatim to the Channel CRD as Spec section.

(Members of ChannelableSpec are embedded into this type.)

Channel conforms to Duck type Channelable.

(Members of ChannelableStatus are embedded into this type.)

Channel conforms to Duck type Channelable.

Reference to a channel that will be used to create the subscription You can specify only the following fields of the ObjectReference: - Kind - APIVersion - Name The resource pointed by this ObjectReference must meet the contract to the ChannelableSpec duck type. If the resource does not meet this contract it will be reflected in the Subscription’s status.

This field is immutable. We have no good answer on what happens to the events that are currently in the channel being consumed from and what the semantics there should be. For now, you can always delete the Subscription and recreate it to point to a different channel, giving the user more control over what semantics should be used (drain the channel first, possibly have events dropped, etc.)

Subscriber is reference to (optional) function for processing events. Events from the Channel will be delivered here and replies are sent to a Destination as specified by the Reply.

Reply specifies (optionally) how to handle events returned from the Subscriber target.

Delivery configuration

(Members of Status are embedded into this type.)

inherits duck/v1 Status, which currently provides: * ObservedGeneration - the ‘Generation’ of the Service that was last processed by the controller. * Conditions - the latest available observations of a resource’s current state.

PhysicalSubscription is the fully resolved values that this Subscription represents.

SubscriberURI is the fully resolved URI for spec.subscriber.

ReplyURI is the fully resolved URI for the spec.reply.

ReplyURI is the fully resolved URI for the spec.delivery.deadLetterSink.

APIVersion - the API version of the resource to watch.

Kind of the resource to watch. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds

APIVersion - the API version of the resource to watch.

Kind of the resource to watch. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds

LabelSelector filters this source to objects to those resources pass the label selector. More info: http://kubernetes.io/docs/concepts/overview/working-with-objects/labels/#label-selectors

(Members of SourceSpec are embedded into this type.)

inherits duck/v1 SourceSpec, which currently provides: * Sink - a reference to an object that will resolve to a domain name or a URI directly to use as the sink. * CloudEventOverrides - defines overrides to control the output format and modifications of the event sent to the sink.

Resource are the resources this source will track and send related lifecycle events from the Kubernetes ApiServer, with an optional label selector to help filter.

ResourceOwner is an additional filter to only track resources that are owned by a specific resource type. If ResourceOwner matches Resources[n] then Resources[n] is allowed to pass the ResourceOwner filter.

EventMode controls the format of the event. Reference sends a dataref event type for the resource under watch. Resource send the full resource lifecycle event. Defaults to Reference

ServiceAccountName is the name of the ServiceAccount to use to run this source. Defaults to default if not set.

(Members of SourceStatus are embedded into this type.)

inherits duck/v1 SourceStatus, which currently provides: * ObservedGeneration - the ‘Generation’ of the Service that was last processed by the controller. * Conditions - the latest available observations of a resource’s current state. * SinkURI - the current active sink URI that has been configured for the Source.

(Members of SourceSpec are embedded into this type.)

inherits duck/v1 SourceSpec, which currently provides: * Sink - a reference to an object that will resolve to a domain name or a URI directly to use as the sink. * CloudEventOverrides - defines overrides to control the output format and modifications of the event sent to the sink.

Template describes the pods that will be created

(Members of SourceStatus are embedded into this type.)

inherits duck/v1 SourceStatus, which currently provides: * ObservedGeneration - the ‘Generation’ of the Service that was last processed by the controller. * Conditions - the latest available observations of a resource’s current state. * SinkURI - the current active sink URI that has been configured for the Source.

(Members of SourceSpec are embedded into this type.)

inherits duck/v1 SourceSpec, which currently provides: * Sink - a reference to an object that will resolve to a domain name or a URI directly to use as the sink. * CloudEventOverrides - defines overrides to control the output format and modifications of the event sent to the sink.

Schedule is the cronjob schedule. Defaults to * * * * *.

JsonData is json encoded data used as the body of the event posted to the sink. Default is empty. If set, datacontenttype will also be set to “application/json”.

(Members of SourceStatus are embedded into this type.)

inherits duck/v1 SourceStatus, which currently provides: * ObservedGeneration - the ‘Generation’ of the Service that was last processed by the controller. * Conditions - the latest available observations of a resource’s current state. * SinkURI - the current active sink URI that has been configured for the Source.

(Members of SourceSpec are embedded into this type.)

inherits duck/v1 SourceSpec, which currently provides: * Sink - a reference to an object that will resolve to a domain name or a URI directly to use as the sink. * CloudEventOverrides - defines overrides to control the output format and modifications of the event sent to the sink.

(Members of BindingSpec are embedded into this type.)

inherits duck/v1alpha1 BindingSpec, which currently provides: * Subject - Subject references the resource(s) whose “runtime contract” should be augmented by Binding implementations.

(Members of SourceStatus are embedded into this type.)

inherits duck/v1 SourceStatus, which currently provides: * ObservedGeneration - the ‘Generation’ of the Service that was last processed by the controller. * Conditions - the latest available observations of a resource’s current state. * SinkURI - the current active sink URI that has been configured for the Source.

Spec defines the desired state of the ConfigMapPropagation

Status represents the current state of the EventType. This data may be out of date.

OriginalNamespace is the namespace where the original configMaps are in

Selector only selects original configMaps with corresponding labels

(Members of Status are embedded into this type.)

inherits duck/v1 Status, which currently provides: * ObservedGeneration - the ‘Generation’ of the Service that was last processed by the controller. * Conditions - the latest available observations of a resource’s current state.

CopyConfigMaps is the status for each copied configmap.

Name is copy configmap’s name

Source is “originalNamespace/originalConfigMapName”

Operation represents the operation CMP takes for this configmap. The operations are copy|delete|stop

Ready represents the operation is ready or not

Reason indicates reasons if the operation is not ready

ResourceVersion is the resourceVersion of original configmap

Subject references the resource(s) whose “runtime contract” should be augmented by Binding implementations.

Spec is the part where the Channelable fulfills the Subscribable contract.

Spec is the part where the Channelable fulfills the Subscribable contract.

(Members of SubscribableTypeSpec are embedded into this type.)

SubscribableTypeSpec is for the v1alpha1 spec compatibility.

(Members of SubscribableSpec are embedded into this type.)

SubscribableSpec is for the v1beta1 spec compatibility.

DeliverySpec contains options controlling the event delivery

(Members of Status are embedded into this type.)